Archives

Modular cold rooms – save energy through quality
Modular cold room panels have to fulfill very special requirements: Primarily, the panels should have good insulation properties in order to minimise the amount of energy required for cooling. The excellent insulation values of our cold room panels are built on the following three pillars:
1. We use high-insulation polyurethane insulation foam.
2. Our cold room panels have a high-quality dry joint, which minimises heat loss at the joints of the panels.
3. We offer cold room panels with particularly high insulation thicknesses of up to 200mm.

Our cold room panels advantages

1, Convenient installation
We produce cold room panel for assembling small or medium-size cold storage, and other rooms, and, warehouse that need insulation. Every piece of pre-fabricated laminated panel is fitted with heavy duty locks, located on four sides.

2, Best quality and performance
PU foam density:40-42kg/m³
Thermal Conductivity: 0.022W/M-K
Covering color steel metal thickness: 0.4mm, 0.45mm, 0.5mm, 0.55mm, 0.6mm

3, Precise and Perfect details
Thickness: 50mm, 75mm, 100mm, 120mm, 150mm,175mm,200mm optional.
Covering color steel metal thickness: 0.4mm, 0.45mm, 0.5mm, 0.55mm, 0.6mm

Modular cold room panels specification:

PU panel is also called PU sandwich panel, PUR Panel or PUF Panel in which polyurethane foam is been sandwiched between the two outer covers. Our PU panels are available in customized sizes and structure for storage temperature ranges from -36°C to 10°C. The outer two layers are available in profile with zinc coated, galvanized steel, embossed aluminum and stainless steel etc.

Polyurethane cold room panels Features:

1. Our Pu Panel Standard width is 960mm, the length can be customized according to your requirements.
2. PU panel is B2 fire proof grade, keep best insulation effect and safety.
3. Durable zinc-coated cam lock, very easy to install, anti-corrosion effect is very good.
4. 40-42 kg/m3 density PU foam, the insulation effect is good. In other words, can save your electricity cost.
5. CFC free raw material , environmental friendly.
After placing order, our designer will design an exact drawing for your cold room, then you could install it easily.

Polyurethane cold room panels specification:

We cuatomize the sizes of PU Panel by your cold room requirements, the maximum length is up to 12,000mm, the available width is 960mm or 1000mm, the available thickness is with industrial standard of 50mm, 75mm, 100mm, 120mm, 150mm and 200mm. PU panel is suitable for low and high temperature controlled applications like cold room and freezer room, it has the characteristics of good thermal insulation, low cold air leakage, easy to transport and install, lower running cost and higher fire resistance property. B1 and B2 grade PU panels are available for cold room. All the PU panels are connected by the easily operated built-in cam-lock.

We already had exported prefabricated cold room panels to over 45 countries. Our customers are from Swiss, Sweden, Australia, USA, Canada, New Zealand, Japan, Pakistan, Spain, India, Malaysia, Singapore, Malaysia, Philippines, South Africa, Argentina, Indonesia, Kenya, Algeria, Ghana, Guyana, Mongolia, Chile, Peru, Dubai, Poland, Mexico, Brazil, Lebanon, Thailand, Kazakhstan, Turkmenistan, Bangladesh, Colombia, Bahrain, etc.

We are the leading manufacturer of insulated panels for use in structures such as cold rooms, process plants, prefabricated cold room, modular cold storage and buildings. We produce insulated panels in a wide variety of colours and finishes – for both internal and external use, which can be fitted within a range of commercial and industrial structures.

Prefabricated cold room panels

We have pu panels, pur panel, pif panel and puf panels.

Specifications:

Panel Thickness Available: 50mm, 75mm, 100mm, 120mm, 150mm, 175mm and 200mm
Panel Width Available: 500mm – 1200mm
Panel Length Available: 2000mm-12000mm
Regular Steel Sheet Color Code: RAL 9002(Grey White)
PU Material Origin: Germany, Japan or Korea
PU Density: 40-45 KGS/M3
Heat Transfer Coefficient: =0.022 W/M2*K
Pressure: =0.10Mpa
Cubic Area Change: =1% (-30 C-100 C/96h)
Fire Rating: B1 and B2
Surface of Panels: To be plating 0.4mm, 0.5mm or 0.6mm pre-painted white hot galvanized steel sheets or stainless steel sheets and PVC protected films.

Our prefabricated cold room panels application

Any needs, contact us, we have professional engineers for your consultation.

We already had exported prefabricated cold room panels to over 45 countries. Our customers are from Swiss, Sweden, Australia, USA, Canada, New Zealand, Japan, Pakistan, Spain, India, Malaysia, Singapore, Malaysia, Philippines, South Africa, Argentina, Indonesia, Kenya, Algeria, Ghana, Guyana, Mongolia, Chile, Peru, Dubai, Poland, Mexico, Brazil, Lebanon, Thailand, Kazakhstan, Turkmenistan, Bangladesh, Colombia, Bahrain, etc.

Buy cold room panels products and get the best deals at the lowest prices from us. We are factory directly supply cold room insulation PU/PIR/PUR Sandwich Panels. We can produce large quantities once time, so our price is cheap.

Our cheap cold room panels factory introduced the most advanced in domestic and international third-generation automatic continuous production line,the length of the production line is up to 260 metersofwhich foam system uses 6-component foam process,nclude 141B foam system, pentane foam system the length of double-covered machine in the core of the foam part reaches 43 meters it is one of the leading double track machine in length in China,it guarantes the foanlensity of the insulation panel effectively unioiyaiulaiand oher properties.

This production line can produce PU panel with the thicknes:rom 50mm to 250mm, PIR sandwich panel and other types of composite sandwich panel, can be used materialrange:0.4-1.0mm galvanized steetainless steel and pattern aluminum panel. The double-bet machine is the core fthe third -aeneration automatc continuous aroduction ine.it aranteas the toam dansivat the insuilatioanel effectively uiformityainulaioand other properties.

We use high-insulation polyurethane insulation foam
Our cheap cold room panels have a high-quality dry joint, which minimises heat loss at the joints of the panels.
We offer cold room panels with particularly high insulation thicknesses of up to 200mm
Open food items are frequently stored in cold rooms. In this case, the surface of the cold room panels must be food safe. That is, made either of stainless steel, or the surface of the cold room panels are coated with a food safe material.

Application of our cheap cold room panels 

We had exported cold room panels to over 45 countries. Our customers are from Swiss, Sweden, Australia, USA, Canada, New Zealand, Japan, Pakistan, Spain, India, Malaysia, Singapore, Malaysia, Philippines, South Africa, Argentina, Indonesia, Kenya, Algeria, Ghana, Guyana, Mongolia, Chile, Peru, Dubai, Poland, Mexico, Brazil, Lebanon, Thailand, Kazakhstan, Turkmenistan, Bangladesh, Colombia, Bahrain, etc.

We design panels for freezer room applications. Most people would enjoy using the panels for their cold room freezers since they offer the best insulation. Good insulation results in proper maintenance of your products, even better from the temperatures that might damage them. Usually we use 120mm and 150mm panels in freezer cold room.

Freezer cold room panels details

– Pre Fabricated , Insulated , Metal laminated , tounge grrove slip joint with cam lock Panels for Freezing and Chilling

– PU Foam , PIR Foam Insulation

-Pre Painted Galvanized Steel / Stainless Steel / GRP Translucent Sheets on inner and outer side

-Insulation thickness from 60mm upto 200 mm

-Panel width of 960mm each

-Joinery through Camlock and Silicon sealant

Freezer cold room panels advantages:

PU Sandwich panel is composed by insulation PU panel and two layers steel sheet cover. They cover with stainless steel. We widely use them in the fishing and some foods industry. The most effective coating is stainless steel, it can withstand the level of corrosion found in a seafood processing room.

1.  Stainless steel cover: 0.5mm/0.6mm. We use polyurethane as the core material which have the excellent insulation performance and 304 stainless steel sheet as external material, the cold room panel can reduce the heat conduction due to difference between internal and external temperature to achieve maximum efficiency of freezing and refrigeration system.

Stainless steel cold room panels Details: 

1. Our Pu Panel Standard width is 960mm , the length can be customized according to your requirements .
2. PU panel is B2 fire proof grade, safe situation.
3.  cam lock connection pu panel , very easy to install, anti-corrosion effect is very good.
4. 40-42 kg/m3 density PU foam, the insulation effect is good . In other words , can save your electricity cost .
5. CFC-free raw material , environmental friendly.
After placing order ,our designer will design an exact drawing for your cold room , you can install it easily.

Stainless steel cold room panels Feature:

1, Convenient installation

Polyurethane foam sandwich Cam-lock panel is specially designed for assembling small or medium-size cold storage, and other rooms, and, warehouse that need insulation. Every piece of pre-fabricated laminated panel is fitted with heavy duty locks, located on four sides.

2, Best quality and performance

PU foam density:40-42kg/m³
Thermal Conductivity: 0.022W/M-K
Covering color steel metal thickness: 0.4mm, 0.45mm, 0.5mm, 0.55mm, 0.6mm

3, Precise and Perfect details

Thickness: 50mm, 75mm, 100mm, 120mm, 150mm,175mm,200mm optional.
Covering color steel metal thickness: 0.4mm, 0.45mm, 0.5mm, 0.55mm, 0.6mm

Description of Industrial cold room panels

Cold Room panel polyurethane density of is 42 kg / m³ (± 2). They are consisted by an inner metal plate, an outer metal plate, and an intermediate polyurethane insulation layer. We produce Pir, Pur and Pu panels. PIR components present an excellent insulation performance, they are highly effective and lightweight. They offer an excellent thermal conductivity, high resistance to weight, combined with versatility of production. We widely use them in large cold room, cold storage and cold room warehouse. Specially useful in food processing industry, supermarkets, pharmaceutical, chemical, and other that require storing goods in low temperatures.

Features:

1, Superior quality; With advanced equipment and innovation technology, we have complete production management, quality control, and after-sale service system.
2, Excellent cooling efficiency; Our many years of cold room refrigeration experience will help us design a economic refrigeration system to your product, no more and no less.
3, Factory price; Our own factory to assure you reasonable price.
4, Perfect details; World famous brand refrigeration accessories, guarantee long use cycle.

Industrial cold room panels Specifications:

Panel Thickness Available: 50mm, 75mm, 100mm, 120mm, 150mm, 175mm and 200mm
Panel Width Available: 500mm – 1200mm
Panel Length Available: 2000mm-12000mm
Regular Steel Sheet Color Code: RAL 9002(Grey White)
PU Material Origin: Germany, Japan or Korea
PU Density: 40-45 KGS/M3
Heat Transfer Coefficient: =0.022 W/M2*K
Pressure: =0.10Mpa
Cubic Area Change: =1% (-30 C-100 C/96h)
Fire Rating: B1 and B2
Surface of Panels: To be plating 0.4mm, 0.5mm or 0.6mm pre-painted white hot galvanized steel sheets or stainless steel sheets and PVC protected films.

Appication

We aim to bring you high quality, reliable, long lasting and excellent efficiency products. We had exported cold room panels and cold rooms to Australia, USA, Malaysia, Singapore, Malaysia, Philippines, Indonesia, Kenya, Ghana, Chile, Peru, Lebanon, Jordan, Bahrain, Saudi Arabia, Nigeria, Mozambique, Mauritius, Costa rica etc.

The core material of PIR cold room panels also known as cyanuric acid foam, is the product of isocyanate trimerization. They are better heat conductivity and performance. They are fast fit panels and continuous production. We widely use them for large cold storage room, cold room, cold storage warhouse and cold storage. We produce PU,PIR,PUR panels, it has many types, cam-lock type, fast-fit and Tougue-Groove. We supply reasonable cheap insulation panels for cold room.

PIR cold room panels Features:

√ Tongue and groove joint structure improves the panel insulation and air tightness;

√ Stable panel structure;

√ Excellent waterproof performance;

√ Light weight,elegant appearance;

√ Effectively solve the temperature difference in the refrigeration industry.

Technical specification:

Our factory

We manufacture cold storage insulated wall, ceiling and floor panels accroding to customer specified sizes, we use them in building cold storage rooms for chiller and freezer applications. Cold storage insulated Panels are a range of self-supporting metal panels with PIR and with a web joint for the construction of positive/negative temperature for cold storage rooms. The panel has been designed to provide a complete solution to the requirements of the cold storage industry. We have 3 production lines, we can produce puf, pir, pur and pu panels.

Cam lock cold room panels are a type of insulated panel which fits together and is then locked in place using a cam-lock key to ensure optimum insulation is achieved. We widely use them in cold room, cold storage, clean room, blast freezer room etc. Our factory specializes in producing cam lock cold room panels.

Feature:
1, Convenient installation
We specially design the panels for assembling small or medium-size cold storage, and other rooms, and, warehouse that need insulation. Every piece of pre-fabricated laminated panel is fitted with heavy duty locks, located on four sides.

2, Best quality and performance
PU foam density:40-42kg/m³
Thermal Conductivity: 0.022W/M-K
Covering color steel metal thickness: 0.4mm, 0.45mm, 0.5mm, 0.55mm, 0.6mm

Specifications: 

Our factory

Application

We mainly use them for middle size or small size cold rooms. It is widely used in the food industry, medical industry, and other related industries.

In the food industry, a cam lock type cold room panel is usually used in food process factories, slaughterhouses, fruit, and vegetable warehouse, supermarket, hotel, restaurants, etc.

In the medical industry, the cold room is usually used in hospitals, pharmaceutical factories, blood centers, gene centers, etc.

Other related industries, such as chemical factories, laboratories, and logistics centers, also need cam lock-type cold room panels for insulation.