condensing unit for cold room 10hp
A condensing unit is a key component of a refrigeration system, and it plays a crucial role in maintaining the desired temperature in a cold room.
R404a 4VES-10Y Semi-Hermetic Compressor condensing unit for Cold Room 10HP
Highly efficient and proven air cooled condensing units for low and medium temperature application and for high condensing temperatures in commercial refrigeration and all the refrigeration applications where flexible solutions with few additional components are needed.
Condensing unit for cold room 10hp Features:
1. Euiped with original Germany brand new semi-Hermetic compressor, Horse Power from 2HP to 50HP.
2. Voltage can be both 380V/50HZ/3Phase and 440-480V/60HZ/3PH.
3. Open type condensing unit, it is easy for installation and maintenance.
4. Cooling Type: Air-cooled ( can be water-cooled if needed).
5. Used for wide range temperature, from 5℃ to -30 ℃, can used for high, medium and low temperature coldroom, storage freezer.
6. High efficiency, Good reliability, Low noise, Low vibration, No leakage.
7. The unit can be used for R22, R134a, R404a, R407b and R407c refrigerant (gas).
8. Excellent performance: The compressor has a scientific structure design, strictly chosen material and precise procession and it is strictly inspected. The factory has obtained the National Compulsory Products CCC Certification, the National Industrial Products Manufacture License, and the ISO9001:2008 International Quality Supervision System Certification.
9. Accessories: all are world-famous brands, such as Danfoss brand filter, pressure control, hand valve,solenoid valve, sight glass, vibration eliminator, oil separator,oil gauge, condenser with fan motor etc.(if need anticorrosion design, the condenser fin and screw fittings will use stainless steel specifications)
10.Reliable safety device : The compressor is equipped with motor protector and discharge temperature monitor to prevent the overheat of the motor and the compressor and the operation beyond approved application pressure.
Condensing unit for cold room 10hp Specifications:
| Application | Model | Horse Power | Applicable coldroom |
| High temp | 2HES-2Y | 2HP | Chiller room |
| High temp | 2GES-2Y | 2HP | Chiller room |
| High temp | 2FES-3Y | 3HP | Chiller room |
| High temp | 2EES-3Y | 3HP | Chiller room |
| High temp | 2DES-3Y | 3HP | Chiller room |
| High temp | 2CES-4Y | 4HP | Chiller room |
| High temp | 4FES-5Y | 5HP | Chiller room |
| High temp | 4EES-6Y | 6HP | Chiller room |
| High temp | 4DES-7Y | 7HP | Chiller room |
| High temp | 4CES-9Y | 9HP | Chiller room |
| High temp | 4VES-10Y | 10HP | Chiller room |
| High temp | 4TES-12Y | 12HP | Chiller room |
| High temp | 4PES-15Y | 15HP | Chiller room |
| High temp | 4NES-20Y | 20HP | Chiller room |
| High temp | 4HE-25Y | 25HP | Chiller room |
| High temp | 4GE-30Y | 30HP | Chiller room |
| High temp | 6HE-35Y | 35HP | Chiller room |
| Low temp | 2FES-2Y | 2HP | Freezer room |
| Low temp | 2EES-2Y | 2HP | Freezer room |
| Low temp | 2DES-2Y | 2HP | Freezer room |
| Low temp | 2CES-3Y | 3HP | Freezer room |
| Low temp | 4FES-3Y | 3HP | Freezer room |
| Low temp | 4EES-4Y | 4HP | Freezer room |
| Low temp | 4DES-5Y | 5HP | Freezer room |
| Low temp | 4CES-6Y | 6HP | Freezer room |
| Low temp | 4TES-9Y | 9HP | Freezer room |
| Low temp | 4PES-12Y | 12HP | Freezer room |
| Low temp | 4NES-14Y | 14HP | Freezer room |
| Low temp | 4HE-18Y | 18HP | Freezer room |
| Low temp | 4GE-23Y | 23HP | Freezer room |
| Low temp | 6HE-28Y | 28HP | Freezer room |
| Low temp | 6GE-34Y | 34HP | Freezer room |
| Low temp | 6FE-44Y | 44HP | Freezer room |
About calculation of air-cooled condensing unit for cold room. For small and medium cold room, we usually choose semi-hermetic piston condensing unit. For large cold room, we usually choose parallel compressor unit. For blast freezer, we usually choose screw type compressor or double stage compressor. For the cooling capacity, we will design it to meet our clients’ requirement.
For some countries, in Winter the temperature is lower than minus 0°C or in Summer the temperature is more than 45°C. We will consider the climatic environment of the location, and chose suitable condenser model for customers.
I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.